FST DESICCANT AIR DRYERS IN FRAME 1,000M3/H DPS100-H
WELSHPOOL, WA - Delivers Nationally -
-
-
-
+9
FST DESICCANT AIR DRYERS IN FRAME 1,000M3/H DPS100-H : Ask for Price
Made in Germany, DPS100-H adsorption dryer of the DPS series is designed for drying compressed air and nitrogen to pressure dew points of -25°C to -70°C at operating pressures of 6 bar to 16 bar.
The desiccant has a high drying capacity and long service life. This ensures low and stable pressure dew points.
The valve blocks of the DPS100-H have generously sized air flow cross-sections. All valves required for operation of the absorption dryer are compact, free from mechanical strain and integrated into the blocks in a practically leak free manner and easy to maintain.
This DPS100-H dryer has been equipped with a frame for easier transportation and is available to hire across Australia. Contact CAPS for more details.
Features
-Welded steel vessel design to AS1210
-High quality coatings
-Low dust flow at outlet
-Compact valve blocks
-Pre and Post Filter pre-installed to dryer
-Maximum operating pressure 16 bar
-Made in Germany
Specifications
-Power Type= Elec
-Capacity (m3/min)= 16.67
-Rated Power (kW)= 0.5
-Operating Pressure (bar)= 6-16
-Max. Pressure (bar)= 16
-Dewpoint (pdp)= -25 to -70
-Voltage (V)= 240
-Frequency (Hz)= 50/60
-Inlet/Outlet Connections= 2"
-Particulate (micron) 1
-Water (pdp)= -25 to -70
-Oil (mg/m3)= 0.01
-Ambient Temperature (Degrees C)= 5-50
-Dimensions Lxlxh (mm)= 2060 x 1050 x 750
-Weight (kgs)= 560
-Noise Level dB(A)1m= 95
Options
-Switch-over control system
-GSM Module
-Start-up device (minimum pressure valve)
-Differential pressure gauges with potential free alarm contact
-Please contact CAPS for further information on other options
Facebook
Twitter
Email
Print
New Ingersoll Rand 3955B2Ti 1 1/2" Square Drive 5,000ft-lb D-Handle Titanium Air Impact Wrench
New Ingersoll Rand 3942B2Ti 1" Square Drive 3250ft-lb 5000rpm D-Handle Titanium Air Impact Wrench
New Ingersoll Rand M2A090RP95 , 1hp 9000rpm 5" Wire Brush Air Angle Grinder
New Ingersoll Rand 22kW Induction Motor
New CAPS C23228 1/4" Regulator
New Ingersoll Rand EL17 3.0hp 14.3cfm Reciprocating Air Compressor with 50L receiver Tank
New Ingersoll Rand 631S 1" Square Drive 3,172 ft-lb D-Handle Air Impact Wrench
New Ingersoll Rand SS5 Procast Single Stage Pump
New CAPS C22223 1/2" Lubricator
New Ingersoll Rand EL12 7.7cfm Reciprocating Air Compressor
New Ingersoll Rand 2235TIMAX-2 1/2" Drive 1,350ft-lbs Air Impact Wrench with 2" Extended Anvil
New Ingersoll Rand SS3 Procast Pump Suits EL12, EL17, EL18P
New CAPS C23223 1/2" Regulator
New Ingersoll Rand 308B 1/4" Straight Die Grinder, 1/4" & 6mm Collet
New CAPS Universal Protective Boot Suits most 1/2" Impact Wrenches
New CAPS C22222 3/8" Lubricator
New Conquest PTA80 Single Stage Pumps
New Ingersoll Rand M2A180RG4 1hp 18,000rpm Burr Right Angle Air Grinder